ZyXEL Communications STB-1003 - Manual (Page 9)

STB-1003 Quick Start Guide
8
5 Remote Control Button Reference
The following figure shows the front of the STB-1003’s remote control, and identifies its
buttons.
The following table describes the remote control’s button functions.
BUTTON FUNCTION
On / Standby Turns the STB-1003 on, or puts it in standby
mode (use the ON/OFF switch on the STB-
1003’s rear panel to turn it off).
L/R Use this to change the audio balance between
the left and right speakers.
Alphanumeric Keypad Use these to enter numbers, letters and
symbols (see
Entering Numbers, Letters and
Symbols on page 10 ).