Zanussi ZCG7551 - Manual (Page 9)

9
The timer
Please note that this is a 24 hour clock, for
example 2.00pm is shown as 1400.
In the following pages we explain how to set
the controls. Read through them a few times
until you are familiar with the procedure.
If the appliance is switched off on the wall, or
there is a loss of power, the clock will stop
and you will not be able to use the main
oven. When you first switch the electricity
supply on, the timer display will flash.
Set the time of day
Turn the selector knob to ‘Manual’ then turn
to ‘Clock’.
Set the correct time by turning and holding
the setting knob clockwise. Adjust the time
by turning the setting knob in either direction.
Turn the selector knob back to ‘Manual’.
To use the timer
Turn the selector knob to ‘Timer’. Turn the
setting knob clockwise until the display
shows the time you want. The bell symbol
( ) will be showing and this will stay lit up
during the time. Our diagram shows the
timer set to 5 minutes.
If you change your mind and want to cancel
the time you have set, simply turn the setting
knob anticlockwise. Then turn the selector
to ‘Manual’.
When you are using the timer you can make
the clock show the time of day by turning the
selector knob to ‘Manual’. The bell symbol
will stay on to remind you that the timer is
set. At the end of the timed period an alarm
will sound and the bell symbol will go out.
Switch off the alarm by turning the selector
knob to 'Clock'. Then turn to 'Manual' and
the time of day will show in the display.
Selector Setting knob
Cookpot symbol Bell symbol