Look at the leds (lights), 2 access the nbg41xw3g from your computer – ZyXEL Communications 3G Wireless Router NBG410W3G User Manual
Page 5
ENGLISH
5
Look at the LEDs (Lights)
• The POWER ( ) light blinks during start-up and stays green once the NBG41xW3G is
ready.
• The LAN (
) and WAN ( ) lights turn on and stay on if the corresponding con-
nections are properly made.
• The WLAN (
) light turns steady green when the built-in Wi-Fi feature is enabled.
• The 3G OPERATION (
) light turns on when a 3G connection is made and the 3G SIG-
NAL STRENGTH ( ) light indicates the signal strength. See the User’s Guide for more
information on these lights.
V
Check your connections if the power
( )
or LAN
(
)
light does not
turn on. If this doesn’t help, disconnect the NBG41xW3G from its power
source, wait for a few seconds and then reconnect the power.
2 Access the NBG41xW3G from Your Computer
Use the NBG41xW3G’s web configurator to configure settings on the NBG41xW3G.
1 Launch a web browser (such as Internet
Explorer). Enter the NBG41xW3G’s
default IP address, http://192.168.1.1,
and press [ENTER].
2 Click Login (the default password 1234
is already entered).