ZyXEL Communications 3G Wireless Router NBG410W3G - Manual (Page 11)

ENGLISH
11
V
If you cannot connect wirelessly to the NBG41xW3G, check you have
selected the correct SSID and entered the correct security key. If that does
not work, ensure your network adapter is enabled by clicking on the
wireless adapter icon and clicking Enable. See the User’s Guide for more
suggestions.
5 Set Up Wired Internet Access
This section shows you how to set up a wired connection to your ISP and access the
Internet. You can have a wired and 3G connection to the Internet at the same time.
1 Click HOME in the NBG41xW3G’s navigation menu to display the following screen.
• If the WAN 1 status is not Down and there is an IP address (A), congratulations, you have
successfully connected to your ISP. Open a web browser, such as Internet Explorer, and
browse to your favourite web site.
• If the WAN 1 status is Down (or there is not an IP address), click the Wizard icon (B) to
configure your Internet access settings.
2 Click the Internet Access Setup link to
start the wizard.
A
B