Zanussi ZOU 481 - Manual (Page 29)

electrolux 29
29
Instructions for Building In
To ensure correct operation of the built-in assembly,
the kitchen cabinet and the recess for the built-in
appliance must have suitable dimensions. When
the appliance is fitted-in, there must be no open
spaces left and it must be closed on all sides by the
kitchen furniture to prevent the possibility of
inadvertently touching “live” (current carrying)
parts of the oven. All parts ensuring such a
protection, including any covering panel (for
instance, if the appliance is installed at the end or at
the beginning of a kitchen counter) must be
fastened in such a way as to prevent removal of
the same without the aid of some tool. This
appliance can be placed with its back and with one
side close to appliances or walls of higher height.
The other side, instead, must be placed close to
furniture or appliances, having the same height.
Oven dimensions (Fig. C)
Instructions for Building In
Before carrying out the building-in of the oven,
connect it to the hob (see corresponding chapter)
For problem-free functioning of the built-in
appliance, the kitchen unit or the recess into which
the appliance is built must have suitable
dimensions (Fig. D).
Securing the Appliance to the Cabinet
- Open the oven door;
- fasten the oven to the cabinet placing the four
distance holders provided with the appliance
(Fig. E -"A") which fit exactly into the holes in
the frame and then fit four wood screws (Fig.
E - "B).
Fig. C
Fig. E
550 MIN
593
560 - 570
80÷
100
Fig. D