Zanussi ZOU 481 - Manual (Page 22)

22 electrolux
22
Grill heating element
This model has been fitted with a hinged grill ele-
ment to make the roof of the oven especially easy
to clean.
Before proceeding ensure the oven
is cool and disconnected from the
electricity supply.
1) Undo the screw fastening the grill element (see
Fig). When carrying out this operation for the
first time, we recommend using a screwdriver.
2) Then gently pull the grill downwards to allow
access to the oven roof (see Fig).
3) Clean the oven roof with a suitable cleaner
and wipe dry before returning the hinged grill
element to its original position.
4) Carefully push the grill element up into its origi-
nal position and re-tighten the retaining nut.
Ensure the retaining nut on the grill
element is properly tightened so that
it does not fall down when in use.
Oven Shelves and Shelf Supports
The shelf support rails on the left and right hand
sides of the oven can be removed for cleaning the
side walls.
Removing the shelf support rails
First pull the front of the rail away from the oven
wall and then unhitch at the back (1, 2).
Fitting the shelf support rails
To install, first reattach the rails at the back, then put
them into position at the front and press them into
place (3).To clean the shelf support rails, soak in
warm soapy water and remove stubborn marks
with a well wetted soap impregnated pad. Rinse
well and dry with a soft cloth.
1
2
3