How to set the temperature and cooking time, Safety thermostat, The cooling fan – Zanussi ZOB 594 User Manual
Page 10
10 electrolux
10
When the required temperature is reached, an
acoustic alarm will sound for a short time and the
thermometer symbol will illuminate permanently.
How to set the temperature and cooking
time
Press button “ “ and “ “ to increase or decrease
the pre-set temperature while the “°” symbol is
flashing (Fig. 7). The maximum temperature is
250°C.
Press button “ “ and “ “ to increase or decrease
the cooking time while the symbol is flashing
(Fig. 7).
Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
The cooling fan
The cooling fan is designed to cool the oven and
the control panel. The fan switches on automatically
after a few minutes of cooking. Warm air is blown
out through the aperture near the oven door
handle. When the oven is switched off, the fan
may run on after the oven is switched off to keep
the controls cool. This is quite normal.
The action of the cooling fan will depend
on how long the oven has been used and
at what temperature. It may not switch in at
all at lower temperature settings nor run
on where the oven has only been used
for a short time.
Fig. 7