Zanussi ZWF 1840 W - Manual (Page 11)

11
Switching on the appli-
ance/Setting a programme
Select the programme using the programme knob.
3
When you select a programme, you switch the
appliance on at the same time.
– The programme progress display shows the pro-
gramme steps that the selected programme will
carry out.
– The estimated programme duration (in hours and
minutes) appears in the multi-display.
– Depending on the programme, the washing ma-
chine suggests a temperature and a spin speed.
You can change these suggestions.
Changing the temperature
Press the TEMP. key repeatedly until the desired
temperature is displayed.
Changing Spin Speed /Se-
lecting the Night cycle
The washing machine suggests the maximum per-
mitted speed that is suitable for the selected pro-
gramme. You can reduce this speed:
Press the Spin/ (NIGHT CYCLE) button repeatedly
until the desired display lights up.
3
The speed for the final spin can still be altered
during the programme. To do this:
1. Press the START/PAUSE button.
2. Change the speed.
3. Press the START/PAUSE button again.
Night Cycle
With (NIGHT CYCLE) the water is just drained at
the end of the cycle.
There is no spinning during the whole washing cycle.
Because of this the programme runs very quietly.
(NIGHT CYCLE) is therefore particularly suitable if
you want to wash at night.