Yamaha DSP-AZ2 - Manual (Page 6)

4
BASS
VOLUME
VIDEO AUX
SILENT
PROGRAM STEREO
REC OUT
SPEAKERS
INPUT MODE
BASS
EXTENSION
PROCESSOR
DIRECT
SET MENU
PHONES
EFFECT
SOURCE MD/TAPE
CD–R
TUNER
CD
PHONO
DVD
D–TV/LD
CBL/SAT
VCR 1
V–AUX
VCR2 /DVR
NEXT + –
S VIDEO VIDEO AUDIO OPTICAL L R
STANDBY
/ON
NATURAL SOUND AV AMPLIFIER DSP-AZ2
TREBLE
– + – +
6CH
INPUT
A B
D I G I T A L
1 2 3 4 5 6
7 q w e r t y u 8 9 0 i o
CONTROLS AND FUNCTIONS
Front Panel
1 STANDBY/ON
Turns on and sets this unit in the standby mode. When
you turn on this unit, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
Standby mode
In this mode, this unit consumes a small amount of
power to receive infrared-signals from the remote
control.
2 INPUT selector
Selects the input source you want to listen to or watch.
3
(INPUT) MODE
Sets the priority for the types of input signals (AUTO,
DTS, ANALOG) to receive when one component is
connected to two or more input jacks of this unit (see
page 30). Priority cannot be set when 6CH INPUT is
selected as the input source.
4 Remote control sensor
Receives signals from the remote control.
5 Front panel display
Shows information about the operational status of this
unit.
6 VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
7 PHONES jack
Outputs audio signals for private listening with
headphones. When you connect headphones, no signals
are output to the PRE OUT/MAIN IN jacks or to the
speakers.
(There is an exception depending on the “1H SP B SET”
setting on the SET MENU.)
8 BASS EXTENSION
Turns on or off the BASS EXTENSION function at each
time the button is pressed, this feature boosts the bass
frequency of the left and right main channels by +6 dB
(60 Hz) while maintaining overall tonal balance. This
boost is useful if you do not use a subwoofer.
9 PROCESSOR DIRECT
Turns on or off the PROCESSOR DIRECT function at
each time the button is pressed. When this is on, BASS,
TREBLE, and BASS EXTENSION are bypassed,
eliminating any alteration of the original signal.
0102DSPAZ2_1-9_EN(GB) 02.8.22, 0:15 PM 4