Xantrex Technology PH1800 User Manual

Page 47

Text mode
Original mode

Ground Fault Protection

975-0288-01-01

3–11

4. Replace the panel on the top of the inverter and tighten all five screws

securely.

Figure 3-1 Replacing Ground Fault Protection Fuse

Remove the 5 #6-32
Phillips screws on
the top of the
inverter. Lift off the
panel to expose the
terminals.

PV Ground Fault

Protection Fuse

BEFORE REMOVING INVERTER COVER:
Check to ensure the AC Indicator LED is NOT
illuminated and that there are absolutely no
sources of power connected to the PowerHub.

AC Indicator LED