Zanussi ZO 25 Y - Manual (Page 10)

10
OPERATION
Refrigerator/Freezer - Starting-up
and temperature regulation
Insert the plug into the wall socket. Open the
refrigerator door and turn the thermostat knob, to be
found on the upper right side of the inner liner,
clockwise, from the «
O » position, to start the
appliance.
Temperature adjustment is obtained by turning the
thermostat knob to the required setting. A medium
setting of between 2-4 is generally the most suitable.
However, the thermostat knob setting should be
adjusted depending on the temperature required
inside the appliance.
This, in turn, depends on a number of factors such as
the ambient temperature, the number of times the
door is opened, the quantity of food stored and the
location of the appliance.
Turn the knob clockwise, to higher numbers, to obtain
a lower temperature, or anticlockwise if a higher
temperature is required.
Important
If the fridge is not defrosting correctly, it is possible
that because a very low temperature has been
selected, the motor is working continuously, which
prevents the defrost cycle from operating.
To ensure correct defrosting, a lower number should
be selected on the thermostat and you should notice
that the motor cuts out from time to time, which is
correct.
If you wish to return to a lower temperature, turn the
thermostat to a higher number, however you should
turn the setting lower occasionally to allow automatic
defrosting.
GB