P. 13, Choosing the connection method – Yamaha CD Recordable/Rewritable Drive CRW2200 User Manual
Page 21
Setup Procedures
13
Choosing the Connection Method
4
4
4
4 First, check how existing IDE devices are connected to your computer,
and then determine how to connect the CRW2200E drive in conjunction
with those devices.
As a supplemental drive
If the casing of your computer has a spare 5.25-inch drive bay available, such as
with many tower-type computers, you can install the CRW2200E drive
supplemental to the computer’s existing CD-ROM drive.
As a replacement drive
If the casing of your computer does not have a spare 5.25-inch drive bay
available, such as with many desktop-type computers, you can replace the
computer’s existing CD-ROM drive with the CRW2200E drive.
Note
You cannot replace the computer’s existing CD-ROM drive with the CRW2200E drive
using the existing cable if the drive is a SCSI type. In this case, use an IDE cable to connect
the CRW2200E drive.
CRW2200E
CRW2200E
CD-ROM drive