Yamaha CD Recordable/Rewritable Drive CRW2200 - Manual (Page 19)

Setup Procedures
11
This section explains how to connect the CRW2200E drive to a tower-type computer.
Note
The way of removing the casing or panel, or installing built-in devices may differ from your
computer. Be sure to follow the procedures in the documentation that came with your computer.
Opening the Computer
1 1 1 1 Power down your computer and unplug it from the AC outlet.
If you proceed without doing this, you run
the risk of receiving an electric shock and/or
short-circuiting and damaging components,
including the CRW2200E drive.
2 2 2 2 Remove all attached cables and peripheral devices and the outer casing
of the computer. If you need to remove screws in the process, make sure
you don’t lose them. Remove the cover and front panel of the computer.
Note
The method for removing the casing and fitting the drive in the drive bay can vary depending
on the manufacturer. For further details, refer to the documentation that came with your
computer.
Connecting the CRW2200E Drive
Front panel
Cover