Set up – Zenoah BC250 User Manual

Page 18

6. Set up

English

■ INSTALLING HANDLE
• Mount the handle to the shaft tube and clamp it at a

location that is comfortable to you. (SE1)

(1) About 19 inches (48cm)

■ INSTALLING DEBRIS GUARD
• Put the debris guard on the gear box, attach it with

the screws and hardware provided. (SE2)

■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by inserting the

supplied tool into the upper holder on the gear box,
loosen and remove the hexagon nut (left-handed).

2. Fit the line head assembly to the gear shaft over the

holders. Hand-tighten it securely.
Blades should not be used on this model trimmer.

(1)

SE1

SE2

SE3