Zebra Technologies LI 72 User Manual
Page 19
19
RW 420 User Guide
Display Functions Not Accessible from the Keypad
4
Function
Default setting
Scroll & Select Options
WLAN ID
2
Factory Set
N/A
Value
Tear-off
00
• Increase (max. = +10)
Position (Top of Form)
• Decrease (min. = -120
• All protocols ON
Network & RF Settings
• Protocols ON or OFF
individually
Bridge Mode
off
• OFF
• ON
DTR/VBUS-Power Off
OFF
• ON
• OFF
Present-at
000
• Increase (max.= +120)
• Decrease (min. = 000
Displays current
Bluetooth parameters
n/a
Bluetooth operating
parameters
Displays current
802.11b WLAN parameters
n/a
802.11b operating
parameters
Media Type
Journal
• Journal
• Label
Smart Card or
• Off
MSR Card
Off
• Display “RDR”
Reader Status
3
NOTES:
1. LCD Backlight turns on when any key other than FEED is pressed
2. Can be adjusted from the factory default using a PC running Zebra’s Label Vista
label creation program and a data cable link to the printer.
3. Card reader status is under application control, and is not user selectable.
4. The parameters listed above will appear on the display but can only be set using
a PC running Zebra’s Label Vista label creation program and a data cable link to the
printer.