User instructions, Gazco flue sure system, Flame failure device – Yeoman EXE MIDI PR1145 User Manual
Page 8: Running in, Servicing, Ventilation, Installation details, Hot surfaces
8
AR0364
11
6.8 Replace the glass frame using the 6 x frame fixing
screws (see Diagram 4) and close door.
7. GAzCO FLUE SURE SYSTEM
The stove is fitted with the Gazco Flue Sure System, which
will act to cut off the gas supply to the burners in the event
of incorrect operation of the flue. If the system acts to cut
off the gas supply, this indicates that there is insufficient flue
pull. If this occurs a minimum of 10 minutes should be
allowed before trying to relight. Continued operation of this
safety device means there may be a serious problem with
the flue system. A qualified gas engineer should inspect this.
Do not use the stove until an engineer says it is safe to
do so.
8. FLAME FAILURE DEVICE
This is a safety feature of all Gazco stoves which
automatically switches off the gas supply should the pilot go
out.
9. RUNNING IN
The surface coating of your Gazco stove burns off during
the first few hours of use, producing a harmless temporary
odour. This disappears after a short period, but if it persists,
ask your retailer for advice.
10. SERVICING
A qualified gas engineer must service the stove every 12
months. In all correspondence, always quote the Model and
Serial Number found on the data badge at the back of the
stove.
11. VENTILATION
Any purpose provided ventilation should be checked
periodically to ensure that it is free from obstruction.
USER INSTRUCTIONS
12. INSTALLATION DETAILS
Make sure your installer completes the Appliance
Commissioning Checklist on page 3. This records essential
details of this stove. In all correspondence, always quote the
Model and Serial Number.
13. HOT SURFACES
This stove becomes hot during normal use. You must use a
suitable fire guard to protect children, the elderly and the
infirm.