Yamaha RX-V595RDS - Manual (Page 25)

25
English
BASIC OPERATIONS
TO PLAY A SOURCE
3
Select the desired input source by using INPUT.
(For video sources, turn the TV/monitor ON.)
See page 27 if you are using an external decoder or
playing a tape or an MD.
Front panel Remote control
or
The name of the selected input source will appear on the
display.
Notes
• Set the SELECTOR DIAL to the AMP/TUN position on the remote control transmitter.
• To operate the CD player, DVD/LD player, tape deck, MD recorder, or other components using this remote control transmitter, set
the SELECTOR DIAL to the component to be used. (See “SETUP CODES” on page 53.)
1
Set VOLUME to the “
∞
” position.
Front panel
2
Turn the power on.
Front panel Remote control
or
2
5 4
3 1,7
2
7
3,4
01RX-V595RDS-3 6/23/99, 1:12 PM 25