ZyXEL Communications G-2000 Plus V2 - Manual (Page 2)

ZyXEL G-2000 Plus v2 Quick Start Guide
2
Overview
The ZyXEL G-2000 Plus v2 (the ZyXEL device) is a router with a built-in wireless LAN access point that
makes it easy for people to set up a small home/office network and share Internet access via a (cable/DSL)
modem or router.
This Quick Start Guide introduces the ZyXEL device and shows you how to use the web configurator wizard.
See your User's Guide for configuration details and background information on all ZyXEL device features
using the SMT (System Management Terminal) and web configurator.
1 Hardware Installation
2 Hardware Connections
1 LAN: Use an Ethernet cable to connect at least one computer for initial ZyXEL device configuration. These
ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover (automatically adjust to the
type of Ethernet cable you use (straight-through or crossover)).
2 WAN: Connect your modem or router to this port with an Ethernet cable.
Follow the steps below to connect the supplied
antennas.
1 Locate the antenna connectors on the sides of
your ZyXEL device.
2 Screw the antennas clockwise onto the
antenna connectors. The antennas should be
perpendicular to the ground and parallel to
each other.
Note: Make sure the antennas are securely
screwed onto the antenna connectors.