ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 444)

ZyWALL 35 User’s Guide
442 Chapter 28 LAN Setup
28.5 Wireless LAN Setup
Use menu 3.5 to set up your ZyWALL as the wireless access point.
From the main menu, enter 3 to open Menu 3 - LAN Setup to configure the Wireless LAN
setup. To edit the wireless LAN configuration, enter 5 to open Menu 3.5 - Wireless LAN
Setup as shown next.
Figure 248 Menu 3.5: Wireless LAN Setup
Note: If you are configuring the ZyWALL from a computer
connected to the wireless LAN and you change the ZyWALL’s
ESSID or WEP settings, you will lose your wireless connection
when you press [ENTER] to confirm. You must then change the
wireless settings of your computer to match the ZyWALL’s new
settings.
Menu 3.5 - Wireless LAN Setup
Enable Wireless LAN= No
ESSID= Wireless
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Press ENTER to Confirm or ESC to Cancel:
Note: The settings of all client stations on the wireless LAN
must match those of the ZyWALL.