ZyXEL Communications ZyXEL ZyAIR AG-225H - Manual (Page 5)

ZyXEL AG-225H Quick Start Guide
4
1.2 Basic Operation
1. Power on the ZyXEL AG-225H
2. The ZyXEL AG-225H will automatically detect the available wireless
networks in 6~7 seconds.
3. The site survey information will be
displayed on the LCM including the SSID,
channel, signal strength, wireless network
protocol (IEEE802.11a/b/g), and the type
of wireless security/encryption (WEP or
WPA)
4. Push the “Next” button to see more access points you have detected.
For advanced features of the ZyXEL AG-225H, there are totally 3 modes to
choose:
Mode mode is set by default for most users to detect the Wi-Fi
networks.
Mode
(Free Mode)
Hold the “Seek” button for 1 second to switch to mode.
In mode, push the “Seek” button to detect the free hot
spots or available WLAN that you can connect to the Access
Point without any security setting.