beautypg.com

Speaker setup, Speakers to be used, Speaker configuration – Yamaha RX-V10 User Manual

Page 8: Speaker placement

background image

6

SPEAKER SETUP

SPEAKERS TO BE USED

This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The most effective speakers to use with
this unit are front speakers, rear speakers and a center speaker. You may omit the center speaker. (Refer to the “4-Speaker
Configuration
” shown below.)
The front speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your
present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center
sounds (dialog etc.) within programs encoded with Dolby Surround. The center speaker needs to be equal in power to the front
speakers, although the rear speakers should not be equal. However, all the speakers should have high enough power handling to
accept the maximum output of this unit.

SPEAKER CONFIGURATION

5-Speaker Configuration

This configuration is the most effective and recommended one.
In this configuration, the center speaker is necessary as well as
the rear speakers. If the program DOLBY PRO LOGIC or
DOLBY PRO LOGIC ENHANCED is selected, conversations
will be output from the center speaker and the ambience will be
excellent.

Set the center channel mode to the “NORMAL” or “WIDE
position. (For details, refer to page 18.)

4-Speaker Configuration

The center speaker is not used in this configuration. If the
program DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED
is selected, the center sound is output from the
left and the right front speakers. However, the sound effect of
other programs can be the same as that of the 5-speaker
configuration.

Be sure to set the center channel mode to the “PHANTOM
position. (For details, refer to page 18.)

SPEAKER PLACEMENT

The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: front speakers (your normal
stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following.

Front:

In normal position. (The position of your present
stereo speaker system.)

Rear:

Behind your listening position, facing slightly inward.
Nearly six feet (approx. 1.8 m) up from the floor.

Center: Precisely between the front speakers. (To avoid

interference with TV sets, use a magnetically shielded
speaker.)

Front L

Center

Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L

Rear R

Front L

Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L

Rear R

Front R

Center

Front L

TV set

Rear R

Rear L