Yamaha RX-V10 - Manual (Page 19)

17
English
1
Set to the “0” position.
2
Select the front speakers to be used.
* If you use two front speaker systems, press both the A
and B switches.
3
Set to the “0” position.
4
Turn the power on.
5
Select the PRO LOGIC or PRO LOGIC
ENHANCED program, so that the corresponding name
lights up on the display.
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test
tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same from
each speaker. This is important for the best performance of the digital sound field processor.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.
SPEAKERS
OFF ON
B
A
BASS TREBLE
0
– +
0
– +
BALANCE
L R
VOLUME
0 I0
POWER
REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
DVD/LD
2CH/5CH
PRESET A/B/C/D/E – +
LEVEL
DELAY/REAR
/CENTER TEST EFFECT
PROGRAM PROLOGIC ENHANCED
– +
TAPE A/B
ON/OFF
TUNER
CD
PHONO
VCR
5
CONTINUED
1 4
2 3
PROLOGIC ENHANCED