Yamaha RX-V10 - Manual (Page 35)

33
English
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 19.
1
Press once or more so that “CNTR” appears on the
display.
2
By continuously pressing the “+” or “–” side of the LEVEL
key, the level value changes continuously.
Notes
● This adjustment can be made only when the digital sound
field program DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED is selected, or the “DVD 5cH” input source
mode is selected.
● Once the output level is adjusted, the level value will be the
same in the DOLBY PRO LOGIC and DOLBY PRO LOGIC
ENHANCED programs.
Adjustment of the CENTER LEVEL
LEVEL
– +
DELAY/REAR
/CENTER
WIDE
Adjustable
Adjustment of the REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 19.
1
Press once or more so that “REAR” appears on the display.
2
By continuously pressing the “+” or “–” side of the LEVEL
key, the level value changes continuously.
Notes
● This adjustment can be made only when the built-in digital
sound field processor is on, or the “DVD 5cH” input source
mode is selected.
● Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
WIDE OGIC
LEVEL – +
DELAY/REAR
/CENTER
TEST WIDE
Adjustable
TEST WIDE