Yamaha DSP1D-EX - Manual (Page 6)

6
K TIME CODE IN connector
This balanced XLR3-31 connector receives SMPTE
time code (LTC) for analog input from the external
device. The rated input level is –10 dB, and the pin
assignment is as follows.
1=ground, 2=hot, 3=cold
L CONSOLE I/O 1, 2 slots
Connect these slots to the DIGITAL I/O CONSOLE
jacks of the CS1D control surface to transmit multi-
channel digital audio signals. Use a genuine Yamaha
half-pitch 68-pin cable for connection.
M CASCADE IN, OUT slots
Use one of these connectors to cascade two DSP1D/
DSP1D-EX units to transmit multi-channel digital
audio signals. Use a genuine Yamaha half-pitch 68-pin
cable to connect the CASCADE IN (or OUT) to the
CASCADE OUT (or IN) of another DSP1D/DSP1D-
EX.
These connectors are provided for future system
expansion, but they are not operative in the current
software version.
N OUTPUT 1–6 slot
Use these slots to connect the INPUT connectors of an
analog output unit AO8 series or DIO8 digital I/O
unit to output multi-channel digital audio signals
from the DSP1D/DSP1D-EX. Use a genuine Yamaha
half-pitch 68-pin cable for connection.
O INPUT 1–10 slot
Use these slots to connect the OUTPUT connectors of
an analog input unit AI8 series or DIO8 digital I/O
unit series to input multi-channel digital audio signals
to the DSP1D/DSP1D-EX. Use a genuine Yamaha
half-pitch 68-pin cable for connection.
P Ground connector
Be sure to ground the unit to avoid the risk of electrical
shock before you insert the power plug into an AC outlet.
This product comes with a 3-pin power cord. If the
ground connector of the AC outlet has already been
grounded, the unit will be grounded effectively by
using the 3-pin power cord.
Grounding the unit is also effective for preventing
hum and other noise.
■ Specifications
Digital I/Os
Sampling frequency
39.69 kHz – 50.88 kHz
44.1 kHz, 48 kHz
Power supply
USA and Canada : 120 V, 60 Hz
Others : 230 V, 50 Hz
Power consumption 170 W
Dimensions (W
×
H
×
D) 480 mm
×
408.7 mm
×
460.8 mm
Weight 33 kg
Operating temperature 10 – 35˚C
Fan circuit always fixed
Accessories power cable 2.5 m
×
1
I/O connectors Level Type
DIGITAL I/O INPUT 1 –10 RS-422 D-sub, half-pitch, 68-pin connector (female)
×
10
DIGITAL I/O OUTPUT 1 – 6 RS-422 D-sub, half-pitch, 68-pin connector (female)
×
6
DIGITAL I/O CASCADE IN, OUT RS-422 D-sub, half-pitch, 68-pin connector (female) × 2
DIGITAL I/O CONSOLE I/O 1, 2 RS-422 D-sub, half-pitch, 68-pin connector (female)
×
2
CONTROL I/O CONSOLE 1 IN, OUT –0.225V — –1.825V/50
Ω
BNC connector
×
2
CONTROL I/O CONSOLE 2 IN, OUT –0.225V — –1.825V/50
Ω
BNC connector
×
2
REMOTE RS-422 RS-422 D-sub, 9-pin connector (female)
GPI
C-MOS IN, Open collector OUT
1 pin: 150mA, 8pin total: 500mA
D-sub, 25-pin connector (female)
TIME CODE IN SMPTE format, Nominal –10 dB/10 k
Ω
XLR-3-31 type connector
MIDI IN, OUT, THRU MIDI format 5-pin DIN connector
×
3
PC CONTROL RS-232-C RS-232-C D-sub, 9-pin connector (male)
PC CONTROL USB 0V — 3.3V B type USB connector
WORD CLOCK IN TTL/75
Ω
(ON/OFF) BNC connector
WORD CLOCK OUT TTL/75
Ω
BNC connector