ZETA Music Systems ZMC-200 - Manual (Page 20)

15
ZETA Music Systems, Inc.
ZMC-200 Manual Rev2.0
THE FOUR MODES OF OPERATION
GLOBAL MODE
All of the parameters in Global mode apply to all the presets in your ZETA
SYNTHONY II including information regarding MIDI channels, the
instrument you are playing, basic tuning, or the sensitivity of each string
you play. Some of these parameters should be checked/changed before you
use your ZETA SYNTHONY II for the first time so that it can operate
optimally with your instrument.
GLOBAL SETTINGS FOR PICKUP SYSTEMS
Zeta’s three MIDI-capable pickup systems each demonstrate
different performance characteristics when used with the
Synthony II. In order to optimize the performance of each
specific pickup system, Zeta has created preset sensitivity
settings that the User can select for their specific instrument.
Although certain Global parameters have been preset to approximate
sensitivity levels, you will still need to tell your Synthony II which
instrument you are playing.
VIOLINISTS AND BASSISTS
If you are a Violinist, the Synthony II defaults to Violin for
INSTRUMENT (1-3; see Chart, below, for appropriate pickup system). If
you are a Bassist, the Synthony II defaults to Bass (Crossover or Uprite) for
INSTRUMENT (4-5; see Chart, below, for appropriate pickup system).
1. Press the GLOBAL button.
2. Using the PARAMETER+ button, scroll up until you reach
INSTRUMENT.
3. Using the VALUE +/- buttons, select the appropriate INSTRUMENT
preset, based on the Chart (below).
(Violists and Cellists - skip #4 and see VIOLISTS AND CELLISTS section
below).
4. Press EXIT twice to return to PRESET mode.
VIOLISTS AND CELLISTS