ZETA Music Systems ZMC-200 - Manual (Page 10)

5
ZETA Music Systems, Inc.
ZMC-200 Manual Rev2.0
QUICKSTART
It’s certainly understandable that you are not in the mood
right now to learn all about the theory and structure of your
ZETA SYNTHONY II. You can do that later in the pages of
this manual. Now it’s time to dabble a little:
BASIC SETTINGS
Before you start, it’s important to tell the ZETA
SYNTHONY II a few things about the instrument you’ll be
playing. The more exact you are about these basic settings,
the more exact your ZETA SYNTHONY II’s neural net will
be able to interpret your playing style and adjust to how you
play. The default parameters are set so that you will
probably only have to change a few of them. Then later,
when you get to know your ZETA SYNTHONY II a bit
better, you will be able to fine-tune these settings (Global
Parameters).
1. Using the 13 pin jack on the front side of the ZETA
SYNTHONY II, connect your Zeta instrument to the
SYNTHONY II using the connector cable provided. The
cable has two different ends and can only be connected to
the instrument and SYNTHONY II one way. If you will be
using an external MIDI instrument, connect it using the
MIDI-out port on the ZETA SYNTHONY II and the MIDI-
in port on the synth using normal MIDI cables.
2. Turn on the ZETA SYNTHONY II. Wait for a moment
until the SYNTHONY II has completed its initialization
process and the display is still.
3. Press the GLOBAL button. In the display you now see
”BASIC CHANNEL.” If you see a ”1” after the colon, leave
it. If not, use the +/- Value buttons to set this value to 1.