ZyXEL Communications P-2602HWNLI - Manual (Page 7)

P-2602HWNLI Quick Start Guide
7
Note: You should have a voice account already set up.
2.2 Regular Phone Line Configuration
When one of your VoIP accounts is registered, the P-2602HWNLI normally uses the Internet (not the regular
phone line) to make phone calls. Follow the directions in this section to make sure you can also use the
regular phone line while one of your VoIP accounts is registered.
Note: When the P-2602HWNLI does not have power, only the phone connected to the
PHONE 1 port can be used for making calls. Ensure you know which phone this is, so
that in case of emergency you can make outgoing calls.
In the main screen, click VoIP > PSTN Line (or ISDN Line if you want to configure for an ISDN phone).
1 Select the SIP server profile of your
VoIP service provider, either SIP
Profile 1 or SIP Profile 2, and click
Apply. If your VoIP service provider is
not in the list, select None and click
Apply.
2 Fill in the fields with information from
your voice service provider. Leave the
default settings in fields for which no
information was provided (except if
otherwise specified).
If you have a SIP account like
[email protected] ,“1234” would
be the SIP Number and “VoIP-
provider.com” would be the SIP Service
Domain.
This screen configures SIP account 1.
Select the check box if you have a
second SIP account that you want to
use.
Note: If your selected a preconfigured SIP profile, just enter your SIP number, user name and
password. Leave the remaining fields at default.