Xerox DocuColor 1632 - Manual (Page 21)

USER GUIDE (M
ACHINE
ADMINISTRATOR)
4–17
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Tray 5 (Bypass) Paper Size
Defaults
Paper sizes can be assigned to Tray 5 Standard Size buttons 1 to
11. 11 sizes can be assigned to this paper size list.
• A/B Series Size -A3, A4 SEF, A4 LEF, A5 SEF, A5 LEF, A6,
B4, B5 SEF, B5 LEF, B6
• Inch Size - 12 x 8", 11 x 17", 11 x 15", 8.5 x 14", 8.5 x 13", 8.5
x 11" SEF, 8.5 x 11" LEF, 5.5 x 8.5" SEF, 5.5 x 8.5" LEF
• Others - 8K, 16K, 6K
• Variable - Set the X (horizontal) range between 140 and
483mm, and the Y (vertical) range between 100 and 305mm in
1mm increments
Setting Printing Priority Defaults
Select which job will be prioritized when the machine receives a
copy job and printer job at the same time. If both are set at the
same priority, jobs are processed in the order they are received.
Depending on the condition of the machine, they may not be
processed according to this setting.
Copy Job Sets the priority that will be given to copy jobs.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 38, 3rd Priority.
Printer Job Sets the priority that will be given to print jobs.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 48, No Priority.
Setting Description
18 1st priority
28 2nd priority
38 3rd priority
48 No priority