Zanussi ZKT 650 D - Manual (Page 17)

17
Displaying the remaining cooking
time
If you select a cooking zone which is in timer mode,
the cooking time still remaining appears in the timer
display window.
Using the timer to measure short
periods of time (“Minute Minder”).
1
Important! None of the cooking zones should
be set with the Timer!
1. Touch the "On/Off" sensor field for around two
seconds.
The digital display
_ flashes.
2. Touch the TIMER sensor field to activate the Ti-
mer function.
3. Using the or sensor fields, set the desired
length of time (for example, 20 minutes).
The Timer begins to run after a few seconds, and in-
dicates the time remaining.
When the set time has elapsed, an audible signal is
sounded.
4. Touch the TIMER sensor field, to switch off the
signal.
Ending the timer function prema-
turely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer
simultaneously
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the and buttons simultaneously: The
cooking zone and timer will switch off.
Switching off the timer - leaving the
cooking zone active
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the “Timer” button again.
3. Touch
the and buttons simultaneously:
– Only the timer will switch off.
– The cooking zone will stay on.