Zanussi ZKT 650 D - Manual (Page 14)

14
Cooking with the Automatic
Heating-Up Function
All four cooking zones of the cooking field can be
controlled in nine stages and have an automatic
heating-up function:
– 1, Lowest heat setting
– 9, Highest heat setting
– a, Heating-up function.
With the automatic heating-up function (
a), the
cooking zone operates for a certain time at full ca-
pacity and then automatically switches back to the
heat setting selected for further cooking.
The duration of the automatic heating-up function
depends on the heat setting selected for further
cooking.
1. Select the required cooking zone with the cooking
zone sensor fields. The decimal point in the associ-
ated display field illuminates.
2. With the or sensor fields select heat setting
9. Stop briefly and touch the sensor field again.
a lights up in the heat setting display.
3. Next, touch the sensor field and set the required
continued heat setting
1 to 8. The heat setting se-
lected for further cooking then is displayed.
After 5 seconds, a appears in the display again in-
stead of heat setting selected for further cooking.
The heat setting is displayed again after the heating-
up time has ended.
3
If you select a higher heat setting when the au-
tomatic function is in operation, e.g. from
3 to
5, the previous heating-up time is taken into
account. If you select a lower setting, then the
automatic function is brought to an immediate
end. If you start cooking again on a cooking
zone that is still warm, the automatic heating-
up function uses the residual heat. This saves
time and energy.