Zanussi FLA 801 W - Manual (Page 7)

7
Operating Sequence
Before your first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 90°C
Suppose you have 4.5 kg of heavily soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing
1. Load the laundry
Open the door.
Place the laundry in the drum, one item at a time,
shaking out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out a prewash(*), pour detergent
into the compartment marked
(*) Prewash is available in programme “A”.
3. Add the fabric softener
(if required)
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
«MAX» mark in the drawer).
Close the drawer gently
4. Select the required programme
Turn the programme selector dial CLOCKWISE to the
required programme.
P0004
AL025
AL023
AL038