Unpacking – Zanussi FLA 801 W User Manual

Page 25

Unpacking

All transit bolts and packing must be removed
before using the appliance

You are advised to keep all the packaging for re-use in
case the appliance has to be transported again.

■

Unscrew and remove the three rear transit bolts
(using a spanner).

■

Lay the machine gently on its back, making sure
that the hoses are not squashed.

We suggest a polystyrene angle bracket from the
packing is placed on the floor before tilting it back
to avoid the hoses being squashed.

■

Carefully remove the polyethylene bags located at
the base of the machine by pulling them toward the
centre of the machine.

■

Place the machine in an upright position and
remove the three plastic bolts.

■

Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the instruction
booklet.

AL009

P0287

P0018

P0002

P0001