Zanussi FLA 801 W - Manual (Page 10)

10
5. Select the required programme
Turn the programme selector dial CLOCKWISE to the
required programme
6. Start the machine
Before starting up the machine check that:
■ the appliance is plugged in
■ the water supply taps are turned on
■ the door and the detergent dispenser drawer are
closed.
Pull the programme selector dial outwards
The mains-on light will illuminate and the machine will
start operating
7. At the end of the programme
The machine stops automatically and the mains-on light
goes out.
If you have depressed the Rinse Hold button , the
machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water
release the same button ( the clothes will be gently
spun) or select programme “N”
The door is controlled by a safety device which releases
3 minutes after the end of the programme.
Before opening the door ensure there is no water in
the drum.
Switch the machine off by pushing in the programme
selector dial.
When the programme has finished, you are advised to
unplug the appliance and turn off the water taps
Leave the door open to prevent the formation of mildew
and unpleasant smells.
AL038