X-Micro Tech. WLAN 11g - Manual (Page 19)

DHCP Server: Enables the DHCP server to allow the router to automatically assign
IP addresses to de vices connecting to the LAN. DHCP is enabled by default.
address, and MAC address of the client.
to
all LAN devices connected to the router.
N devices connected to the router.
omain Name: Type the local domain name of the network in the text box. This item
is optional.
his screen enables you to set up the router WAN connection, specify the IP address
for the WAN, add DNS numbers, and enter the MAC address.
All DHCP client computers are listed in the table at the bottom of the screen,
providing the host name, IP
Start IP: Type an IP address to serve as the start of the IP range that DHCP will use
assign IP addresses to
End IP: Type an IP address to serve as the end of the IP range that DHCP will use to
assign IP addresses to all LA
D
3.1.2 WAN
T
Connection Type: Select the connection type, either DHCP client, Fixed IP or PPPoE
from the drop-down list.
WAN IP: Select whether you want to specify an IP address manually, or want DHCP
to obtain an IP address automatically. When Specify IP is selected, type the IP address,
19