Yamaha H01 - Manual (Page 18)

Selecting & Playing Voices
H01 Owner’s Manual
ENGLISH
18
Adding Variations to the Sound – Reverb
This control enables you to select four different types of reverb effect that add extra depth and
expression to the sound to create a realistic acoustic ambience.
Selecting a Reverb Type
While holding down the [VOICE] button, press one of the C2–E2 keys to select a
reverb type.
Adjusting Reverb Depth
While holding down the [VOICE] button, press one of the C3–G#4 keys to
adjust the reverb depth for the selected voice.
While holding down the [VOICE] button, press the A4 key to set the reverb to
the depth most suitable for the selected voice.
Key Reverb Type Description
C2 Room This setting adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
C#2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a small-size concert hall.
D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect sim-
ulates the natural reverberation of a large concert hall.
D#2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
C0 C1 C2 E2
Reverb depth range:
0 (no effect)–
20 (maximum depth)
NOTE
C0 C1 C2 C3 (Depth=0) C4 A4
G#4 (Depth=0)
The depth value increases as you press higher keys.
The default reverb type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
16