Yamaha H01 - Manual (Page 10)

Before Using the H01
H01 Owner’s Manual
ENGLISH
10
Turning the Power On
1.
Insert the plug of the power cable into the
AC connector on the instrument, then
plug the other end of the cable into the
proper AC outlet on the wall.
CAUTION
Never interrupt the power supply during the instrument load opera-
tion! Doing so can result in loss of data.
2.
Press the [POWER] switch to turn the
power on.
The power indicator located to the right of the [ POWER ] switch
lights up.
CAUTION
Never interrupt the power supply while the instrument is loading
data from a USB device! Doing so can result in loss of data.
CAUTION
Even when the instrument is turned off, electricity is still flowing to
the instrument at the minimum level. When you are not using the
H01 for a long time or during electrical storms, make sure you
unplug the AC power plug from the wall AC outlet.
Setting the Volume
Initially set the [MASTER VOLUME] slider about halfway
between the “MIN” and “MAX” settings. Then, when you
start playing, re-adjust the [MASTER VOLUME] slider to the
most comfortable listening level.
Using Headphones
Connect a set of headphones to one of the
[PHONES] jacks.
Two
[PHONES] jacks are provided. You can
connect two sets of stereo headphones. (If
you are using only one set of headphones,
you can plug them into either jack.) It can also
connect to an amplifier/speaker system.
CAUTION
To protect your hearing, avoid listening to the H01 at a
high volume level for long periods of time.
All current panel settings will be changed to the initial settings when turn-
ing the power off and on.
TERMINOLOGY MASTER VOLUME:
The volume level of the entire keyboard sound.
(The shape of plug differs
depending on locale.)
NOTE
The level increases. The level decreases.
Stereo mini
plug
8