Yamaha RX-V870 - Manual (Page 25)

25
The provided remote control transmitter is designed to control this unit and other YAMAHA components. If the CD player, turntable,
LD player and tape deck connected to this unit are YAMAHA components, then this remote control transmitter will also control
various functions of each component.
Moreover, this remote control transmitter can learn various functions from other remote control transmitters without losing the preset
key functions. If you use this “learning” function, you will no more need so many remote control transmitters to control various
components to be used. For details, refer to page 27.
KEY FUNCTIONS
When you operate this unit and/or other YAMAHA components with this remote control transmitter, set the YPC-USER-LEARN
switch to the YPC (Yamaha Preset Code) position.
REMOTE CONTROL TRANSMITTER
For Control of This Unit
Illustrations: RX-V1070
Parts in shaded areas ( ) are not present on RX-V870.
Refer to “YPC-USER-LEARN switch”
on page 27.
Set the SLEEP time.
Refer to “Blank keys” on page 27.
Selects input source.
Used for speaker balance
adjustment.
Selects preset station number.
* +: Selects higher preset station
number.
–: Selects lower preset station
number.
A/B/C/D/E: Selects the page (A – E)
of preset station buttons.
Adjusts sound output level at
each speaker.
Refer to “RESET button” on page 27.
Refer to page 28.
Adjusts delay time.
Selects a program from
the digital sound field processor.
Switches on/off digital sound field
processor.
Turns the master volume level up/down.
When pressed, mutes the volume level.
To resume original volume level, press
this again.
While muting, the indicator on the
VOLUME control flashes continuously.
Turns the power on/off.