Yamaha RX-V870 - Manual (Page 24)

24
SETTING THE SLEEP TIMER
If you use the SLEEP timer of this unit, you can set this unit to be turned off automatically. When you are going to sleep while
enjoying a broadcast or other desired input source, this timer function is helpful.
Notes
● The SLEEP timer can be controlled only with the remote control transmitter.
● The components on which the SLEEP timer is effective are the sources connected to a SWITCHED OUTLET on the rear panel
of this unit.
Select the desired SLEEP time. Whenever the SLEEP key
is pressed, the SLEEP time will change as follows.
After a while, the display returns to the indication before
the SLEEP timer is set, and the “SLEEP” indicator stops
flashing and illuminates.
The unit will be turned off automatically after the
passing of the SLEEP time you selected.
To set the SLEEP time To cancel the selected SLEEP time
1
2
Indicates the SLEEP time.
Flashes on and off continuously.
The SLEEP timer is OFF.
(The indication before the
SLEEP key is pressed.)
(Minutes)
Press once when
the SLEEP time displays 30.
Returns to the indication
before the SLEEP timer
is set. Goes off.
SLEEP
120 90 60 30
SLEEP