Yamaha RX-V1900BL - Manual (Page 59)

55
En
XM® Satellite Radio tuning
BA
S
IC
OPERA
T
ION
English
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
(page 54).
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
For details, see “XM Satellite Radio operations”
(page 53).
2
Press H
MEMORY (or 9MEMORY).
The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.
y
• To store the selected channel under an empty preset
number automatically, press and hold HMEMORY (or
9MEMORY) for more than 2 seconds instead of step 2.
In this case, the following steps are unnecessary.
• To cancel the preset operation, press HMEMORY (or
9MEMORY) again.
3
To select the preset channel group and
number (A1 to E8), press
G
PRESET/
TUNING/CH l / h (or 8CAT./A-E l / h
and 8
PRESET/CH k / n) repeatedly.
• To select a higher preset channel group and
number, press Gh (or 8k).
• To select a lower preset channel group and number,
press Gl (or 8n).
y
• You can also select a preset number (1 to 8) by pressing
the numeric buttons (A).
• If you select a preset number being used ("*" appears next
to the preset number), the current preset channel will be
overwritten.
4
Press F
ENTER (or 8ENTER).
The preset channel is set and the PRESET indicator
disappears.
■ Clearing preset channels
You can clear the assignments of preset XM Satellite
Radio channels.
1
Select the preset XM Satellite Radio channel
to clear.
For details, see “Preset Search mode” (page 54).
2
Press and hold I
SEARCH MODE (or
H
SRCH MODE) until “CLEAR?” appears in
the front panel display.
3
Press F
ENTER (or 8ENTER) to clear the
preset channel.
To cancel the operation, press
ISEARCH MODE
(or HSRCH MODE).
Before performing the following operations, set the operation
mode selector on the remote control to ESOURCE and then
press 3XM.
Setting the XM Satellite Radio
preset channels
0 4 3 X M U
Channel number
PRESET M E M O R Y A 1
0 4 3 X M U
Lights up