Yamaha RX-V1900BL - Manual (Page 32)

28
En
Connections
The HD indicator is only applicable to the U.S.A. model only
and lights up when this unit is turned into the HD Radio
reception band.
o Menu browsing indicator
Lights up if any items exist under the current item during
menu browsing for iPod, etc.
p SLEEP indicator
Lights up while the sleep timer is on (page 38).
q VOLUME level indicator
• Indicates the current volume level.
• Flashes while the mute function is on (page 37).
r Input channel and speaker indicators
Input channel indicators
• Indicate the channel components of the current
digital input signal.
• Light up or flash according to the settings of the
speakers when this unit is in the automatic setup
procedure (page 30).
Presence speaker indicators
Light up according to setting for “PRESENCE SP”
(page 76) in “CONFIG” when this unit is in the auto
setup procedure (page 30) or the speaker level setting
procedure in the “LEVEL” (page 76).
s ZONE2/ZONE3 indicators
Lights up when Zone 2 or Zone 3 is turned on
(page 100).
The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
Display window (4)
[1] ID1/ID2 indicator
Indicates the currently selected remote control ID
(page 102).
[2] Transmit indicator
Appears while the remote control is sending infrared
signals.
[3] Zone indicators
Indicates the currently controlling zone (page 100).
[4] Information display
Shows the name of the selected input source that you
can control.
Infrared window (1)
Outputs infrared control signals. Aim this window at the
component you want to operate.
Note
L C R
SL LFE SR
SBL SB SBR
Presence speaker indicators
Input channel indicators
Using the remote control
30 30
Approximately 6 m (20 ft)
Remote control sensor
MAIN
ZONE 2
ID 2 ID 1
ZONE 3
[1] [2]
[3] [4]