Yamaha RX-V795RDS - Manual (Page 20)

18
GND
FM
ANT
AM
ANT
75 Ω UNBAL.
GND
PHONO CD TAPE/MD DVD/LD TV/DBS VCR
IN OUT
1 3 4
AUDIO SIGNAL
IN(PLAY) OUT(REC)
DVD/LD
COAXIAL OPTICAL OPTICAL
DVD/LD TV/DBS CD
DIGITAL SIGNAL
SUB
WOOFER
EXTERNAL DECODER INPUT
MAIN CENTER SURROUND
ON SCREEN SELECTOR
S VIDEO VIDEO
MONITOR
OUT DVD/LD TV/DBS
IN OUT
VCR
MONITOR
OUT
IN OUT
VCR
VIDEO SIGNAL S VIDEO SIGNAL
VIDEO
IN
S-VIDEO
IN
VIDEO IN VIDEO OUT S-VIDEO IN S-VIDEO OUT
Ⅵ
Connecting to S VIDEO terminals
If your video cassette recorder and your monitor are equipped
with “S” video terminals, connect this unit’s S VIDEO SIGNAL
VCR IN and OUT terminals to the “S” video input and output of
your video cassette recorder, and connect this unit’s S VIDEO
SIGNAL MONITOR OUT terminal to the “S” video input of your
monitor. In addition, a video unit equipped with an “S” video
output can be connected to the VIDEO AUX S VIDEO terminal
on the front of this unit.
With these connections, you can play back or record high
quality pictures. Otherwise, connect the “composite” video
terminals from your video cassette recorder, etc. to the VIDEO
SIGNAL terminals of this unit, and connect this unit’s VIDEO
SIGNAL MONITOR OUT terminal to the “composite” video
input of your monitor. Note
If video signals are sent to both S VIDEO input and VIDEO
input terminals, the signals will be sent to their respective
output terminals.
S VIDEO terminals
This unit provides you with S VIDEO terminals in addition
to standard type VIDEO terminals.
S VIDEO terminals transmit video signals separated into
luminance (Y) signals and color (C) signals. In comparison
with S VIDEO terminals, standard type VIDEO terminals
transmit “composite” video signals.
Video cassette recorder
TV monitor
PREPARATION
: S-video cable
(*1): ON SCREEN SELECTOR S VIDEO/VIDEO switch
Set this switch to either position to select the TV monitor on
which you want to display the on-screen information.
S VIDEO: The on-screen information is displayed on the TV
monitor connected to the S VIDEO SIGNAL
MONITOR OUT terminal.
VIDEO: The on-screen information is displayed on the TV
monitor connected to the composite VIDEO
SIGNAL MONITOR OUT terminal.
(*1) (Europe model)