Yamaha CD REWRITABLE DRIVE CRW8824S-NB - Manual (Page 25)

Installation
6 Connect one end of the 50-pin SCSI flat cable to the computer’s SCSI adapter
card. Align the red line of the cable with Pin 1 of the card’s SCSI connector.
Next, connect a free 50-pin connector on the SCSI flat cable to the back of the
CRW8824S drive such that the red line on the cable is aligned with pin 1,
marked “SCSI INTERFACE CONNECTOR 1.”
SCSI adapter card
50-pin SCSI flat cable
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR 1
To Pin 1
Pin 1
AUDIO OUT ID SEL ECT PARIT Y TERM INATO R BLOC K SIZE
DC IN PUT 1 +5V G +12V
R L 1 2 4 G
SCSI
INTER FACE CONN ECTO R
SCSI
INTERFACE
CONNECTOR
1
Pin 1
Mark
Align red line with
Pin 1 of SCSI INTERFACE
CONNECTOR 1
17