Yamaha YST-SW1500 - Manual (Page 12)

E- 8
MAIN IN PRE OUT
AC IN
ON POWER
OFF
HIGH LOW OFF
AUTO STANDBY
OUTPUT INPUT
REMOTE OUTPUT TO SPEAKERS
INPUT 1 FROM AMPLIFIER
100Hz 80Hz /MONO NORMAL
INPUT 2 INPUT 3
LFE
GND
H.P.F.OUTPUT
OUTPUT
TO SPEAKERS
INPUT
1
FROM AMPLIFIER
100Hz 80Hz
/MONO
NORMAL
INPUT
2
INPUT
3
LFE
GND
H.P.F.OUTPUT
Connecting to H.P.F. OUTPUT terminals
The use of the H.P.F. OUTPUT terminals for connections with the amplifier will improve sound quality of your speaker system.
The H.P.F. (High-Pass Filter) OUTPUT terminals of the subwoofer cut off frequencies below the selected frequency point from
the input signals, and output high frequencies only. By connecting this terminal with the MAIN IN terminals of the amplifier, the
main speakers reproduce high frequencies only.
This will make the whole sound quality clear by preventing sound muddying between the main speakers and the subwoofer.
* This connection can be made if your amplifier has PRE OUT and MAIN IN terminals or you are using separate amplifiers
(pre-amplifier and main amplifier).
Ⅵ To connect one unit only
Left main speaker Right main speaker
Audio pin cable
(not included)
Amplifier
Subwoofer
Audio pin cable
(not included)
2-SW1500(UB) (02.9.2)a 02.9.2, 6:46 PM 8