Adjusting the projected image – Xerox DP 1015 User Manual

Page 19

Connecting the Projector

Xerox DP1015 User’s Guide

Adjusting the Projected Image

To raise the projector

1. Lift the projector up and press the foot adjustor release button.

The foot adjustor pops out.

2. Press the foot adjustor release button and hold it in while

raising the projector to the display angle you want, then release
the button to lock the foot in position.

To lower the projector

1. Hold the projector with one hand, then press and hold down the

foot adjustor release button.

2. Lower the projector, then release the foot adjustor release

button to lock the foot in position.

NOTE:

The projector is equipped with a “foot adjustor” for

adjusting the projector height.

NOTE:

When placing the projector in its carrying case, please

first retract the foot adjustor to avoid breakage.

Foot Adjuster

Release Button