Zanussi ZCE 8020AX/CH - Manual (Page 13)

B) TO SET THE TIMER TO SWITCH
OFF ONLY
i) Ensure the electricity supply is switched ON
and that the correct time of day is displayed,
e.g. 10.00am as Fig. 8.
ii) Place food in oven.
iii) To set the length of cooking time, press the
'Cook Time' button ( ). Press the increase
control (+) until the required length of cooking
time is displayed, e.g. 2 hrs 15 mins as Fig. 9.
Depress the decrease control (-) if necessary,
until the correct time interval is achieved.
iv) Release the buttons. The 'Cook Time'
indicator ( ) will illuminate and the time of
day will be displayed after 5 seconds.
v) Set the oven temperature. The oven indicator
neon should be ON.
vi) To check the End Time during the cooking
period, simply press the 'Cook Time' button
( )and the remaining time will be displayed,
as Fig. 10.
4. TO CANCEL AN AUTOMATIC
PROGRAMME
i) To cancel an automatic programme press the
'Cook Time' button until the Cook Time
indicator ( ) flashes. Press the decrease
control ( - ) until the display reads 0.00 as
Fig.11.
ii) Release the buttons. The 'Cook Time'
indicator ( ) will flash and after 5 seconds
return to the time of day
iii) Turn off the oven control.
Fig. 8
Fig. 9
Fig. 10
Fig. 11
13