Zanussi ZCE 8020AX/CH - Manual (Page 11)

KEY
A. ANGLED TIMER DISPLAY
B. FUNCTION NEONS
C. VERTICAL TIMER CONTROLS
D. DECREASE CONTROL
E. COUNTDOWN
F. COOK TIME
G. END TIME
H. INCREASE CONTROL
NOTE:
The time of day must be set before the main
oven will operate manually.
1. HOW TO SET THE TIME OF DAY
The oven has a 24 hour clock.
When the electricity supply is first switched ON, the
display will flash 12.00.
To set the correct time press the increase control
button (+) and if necessary, the decrease control
button (-) until the correct time on the 24 hour clock
is reached, e.g. 10.00am as Fig. 1.
Note: The increase and decrease control buttons
operate slowly at first, and then more rapidly.
They should be pressed separately.
2. HOW TO SET THE COUNTDOWN
The 'Countdown' gives an audible reminder at the
end of any period of cooking up to 19 hrs 59 mins. It
is not part of the automatic control.
To set, press the Countdown button. ( ) The
'Countdown' indicator will illuminate and the display
will read 0 . 00 as Fig.2.
To set the correct time duration depress the increase
control (+) until the display indicates the interval to
be timed, e.g. 1hr 45 mins as Fig. 3. If necessary
depress the decrease control (-) to achieve the
correct time interval.
NOTE: This must be completed within 5 seconds
of first pressing the Selector Control button.
The display will return to the time of day and the
Countdown indicator will be illuminated.
During the operation of the Countdown, you can
check the remaining time period by pressing the
Countdown button ( ).
ELECTRONIC TIMER
Fig. 1
Fig. 2
Fig. 3
D E F G H
C
A
B
11