Tv, vcr, c – X10 Wireless Technology MK19A User Manual
Page 17
33
32
4. Press and release
the mode button
that matches the
A/V equipment
you want to
control. The LED
blinks once.
5. Enter the 3 digit
Code from the
Library Code
Tables. The LED
turns off after the
last digit entered.
6. Point the remote at
your A/V
component and
press the POWER
button. Your A/V
component should
turn off.
7. Turn your A/V
component on and
press CH +. If it
responds, setup is
complete.
Notes:
If your audio/video component does
not respond, try the other codes for your
brand. If it still doesnt respond, try the
Code Search method on page 34.
If the LED blinks rapidly when you
enter the code, you may have entered
an invalid code. Recheck the code in the
code list and try again.
VICTOR ............................................................ 035
.............................................................................
YAMAHA ..................................... 018,065,066,077
HOME AUTOMATION CODES
.............................................................................
X-10 HOME AUTOMATION (RF) ........................... 013
X-10 HOME AUTOMATION (IR543)...................... 014
GE HOMEMINDER ............................................ 015
.............................................................................
U
SING
AUX
TO
CONTROL
A
S
ECOND
TV, VCR, C
ABLE
B
OX
OR
S
ATELLITE
R
ECEIVER
The AUX button is normally used to
control an audio component such as a
CD player, but it can also be configured
to control a second TV, VCR, cable box
or satellite receiver.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
Setup button.
1. Turn on the
equipment you
want to control.
3. Press the AUX
button.