Yamaha LPX-500 - Manual (Page 26)

Functions for Enhancing Projection
22
Procedure
1
Press the button on either the
projector's control panel or the remote
control while the full menu is being
displayed.
The line menu appears.
2
Select an item to be set.
If using the projector's control panel, press the
and buttons.
If using the remote control, press the button
up and down.
The line menu item changes when a button is
pressed.
3
Select the setting value.
If using the projector's control panel, press the
and buttons.
If using the remote control, press the button to
the left and right.
4
Set other items in the same way.
Repeat steps 2 and 3. To return to a previous
menu level after pressing the
button on the
projector's control panel or the remote control so
that a sub-menu is selected, press the [ESCAPE]
button on the projector's control panel or the
remote control.
Displaying and Operating Line Menus
•••• If a setting is executed or a sub-menu
item continues to another level, "
"
appears after the item name. In such
cases, press the
button on either the
projector's control panel or the remote
control to select a setting value in the
displayed menu.
•••• Refer to using the menu functions for
details of each setting item. (p.26)
0 Black Level
Projector Remote control
Projector Remote control
Projector Remote control