ZyXEL Communications Wireless LAN USB Adapter ZyAIR 200 - Manual (Page 6)

ZyAIR 200 Wireless LAN USB Adapter Quick Start Guide
6
4.1.2 Counter
The Counter tab displays the transmission throughput in byte per
second.
4.1.3 AP
Browser
Click Rescan button to display Access Points around the working
environment, the BSSID and SSID of each Access Point, Channel,
Signal and Encryption. To join a displayed Access Point, select the
Access Point you wish to connect .
4.1.4 Configuration
Use Configuration to configure Network Type, Channel,
Transmit(Tx) Rate, SSID (Service Set ID), WEP, RTS/CTS
Threshold and Fragment Threshold.
4.1.5 Encryption
To secure your data transmission, set up your encryption keys in the
Encryption tab.
4.1.6 About
Use About to display the driver, firmware and application version of
your ZyAIR 200.
5 Set Up an Ad-Hoc Network
• Click on Configuration tab. Select Ad-Hoc under Network
Type.
• Select Channel. Click on AP Browser tab to view channel
quality under the Signal column. Change to a better channel
if necessary.