Description of the cooker, Fitting the splash back (only on model zce 610 x) – Zanussi ZCE 610 X User Manual

Page 4

Text mode
Original mode

STOP

SET

TIME

Description of the Cooker

Splash back

(only on model ZCE

610 X)

Back left normal

hotplate

Front left rapid

hotplate

Control panel

Shelf

Oven door

Front right rapid
hotplate

Back right normal
hotplate

Fitting the Splash back
(only on model ZCE 610 X)

A stainless steel splash back is supplied with the
appliance. This is meant to be fitted on the rear edge
of the cooker's hob. The splash back package is in the
oven cavity.

1. Unpack the splash back and dispose of the

packaging with due regard to safety and the
environment.

2. Slide the two bayonets of the splash back into the

relevant supports on the rear edge of the cooker's
hob.